Logo

She’s here….she’s here….she’s actually here….

Esjayell
Starter Member
Thread Starter
Joined: Feb 2024
#1 17 Mar 2025 at 12:22 AM 34 views
There was excitement mixed with anticipation in the Ell house the other morning because Rosina’s body tracking number had become live. So dense was it you could cut through it if you had a sharp enough knife, which reminds me I must locate one in readiness.

Elina got up early (for her) and settled herself on the stairs affording a good view of the hallway and front doors. She was holding a new top and skirt so Rosina’s body would have something to wear. Almost beside her, to her left and a few stairs lower was Leonora with Rosina’s head on her lap and her hands against her cheeks.

Three pairs of eyes were focused on the glazed panel of the inner door that lines up with the glazed panel of the front door, thus you can see anyone arriving. What none of them considered, I’m sure, was that I would be the one going to the door and would therefore block their view entirely! On occasions Leonora bowed her head to speak to Rosina, Elina remained unusually quiet, probably, I reasoned, because I was entertaining her. I was removing some of the long coats from the rack above and behind the inner door, together with other items that had found an almost permanent temporary home along the floor and against the walls of the hallway. With the coats removed and the floor cleared the inner door could be opened fully and secured in place, likewise the front door enabling uninterrupted access from the front door along the whole length of the hall. A quick go over with the Vax and we were ready for the new arrival.

According to the tracking info she arrived at Stanford Le Hope facility at 19:54 on the 11/03/2025, left at 0:35 arriving at Bristol 4:00 12/03/2025, with delivery anticipated between 08:00 and 13:00 the same day. About 13.15 Elina shouted “Some-ones here Hugs!” as I made my way into the hall I heard a knock on the glazed panel of the front door. I went along the hall opened the inner door and got the front door key ready to unlock the door. I opened the door, in front of me was a middle-aged woman who stated “I’ve got a really heavy box for you!” “I know” I replied as once again I followed the driver to the back of the van. There was the box almost in the same position as Elina was just under six years prior, except she was on her side. The woman climbed in and pushed the box over the edge of the loading area, beside it was another, so someone else within my area was also getting one. I lifted the box end and pulled as she pushed. It was heavy, or I had lost more of my strength than I had thought. Together we carried the box into the house, putting it down just past the inner door threshold. She thanked me for helping, I stated it was no problem, we bade each other goodbye, she went to the van, I closed the doors and went back to the bottom of the stairs to be with the girls and surveyed the box.

It looked to be in very good condition, all eight corners and edges appeared to be free of damage, the tape holding the box closed was continuous on all three edges. I inserted the knife blade into the top right corner (by its spine) and drew the blade along the three sides in one continuos motion. Although I did have to re-cut the corners. I opened the flaps, removed the piece of expanded polystyrene at the neck end (by the inner door), then just as I was about to pull the white fluffy blanket from around her body, I saw it, the polystyrene that formed the left side of her protection (think of a casket) was bent or folded over. I removed the piece of 3mm thick ply, placed between the box edge and the poly. that too had been bent. The only things I know that would bend ply is water (inc. steam) or dampness and it has to be held in that position whilst it dries. Strangely it all seemed dry, so what has caused it and where?

Contemplation over, I began removing the blanket, unlike Elina and Leonora where they were wrapped in their respective blankets, this one had the blanket placed over her and tucked in between her body and the poly. I should state that the poly. was also covered with a fluffy protective material. I ventured on removing the blanket from her neck, the body was also inserted into a mesh bag, like a large head bag, as I continued down exposing her body, I stood back in horror. She was the wrong colour, I’d ordered ‘natural’ the same as Elina and Rosina, this was pink! That was not all, her bust was in a different place, higher up, the nipples were trying to see out of the fanlight above the inner door, and not looking at me as they should have been. This was NOT the doll I had seen in her many photo galleries. As I continued to expose her I discovered she was wearing a pair of soft shoes, now that was a thoughtful touch. However when I looked at her right foot I discovered she had what appears to be a broken ankle, her foot is at ninety degrees to her leg.

Yet the box and her protection is undamaged meaning it was done in the factory! I did not remove her from her box. I am not accepting her in this condition. She’s going back to China, to the Oriental Rose / JinSan factory! It is unlikely Rosina (OR 26 ‘Rose’ head) will ever have a body of her own now, likewise the two WM 185 heads I had included for Elina one for photo-shoots, the other in reserve, are also the wrong colour and will also be returned.

The 'bent' spine is wrapped in cotton.
Furthermore, I have mentioned the bent skeleton being used by WM some time ago, I thought that as OR was a different manufacturer, it would continue to produce dolls as it has always done and not follow WM in its use of the bent skeleton. I was wrong, it has! This doll is nothing like its gallery photographs, I can accept minor changes like articulated fingers and shrugging shoulders as these do not alter the stance of the doll unlike this bent skeleton, which I believe will lead to premature body (tpe) failure if one has them as a photographic mannequin. The constant posing will result in not being able to get the skeleton back with the correct angles of the hip and spine joint, the two that have been moved out of (straight) alignment.

The factory photos were taken overhead, or rather looking down on her so she looked as she should (as per the gallery photos). If the photographer had taken one in line with her or in profile then I would have been able to see the body contours and realise instantly she was not what I had expected and would not have approved them or indeed her.

The doll is an Oriental Rose 156D, on a couple of photos in her galleries you will see a line just below her shoulders going across the top of her breasts, to me it looked like she had implants, something I did not like or want so she was dismissed. Then around Christmas time I found a gallery I had not seen before. The breast ‘line’ was not there, obviously it was a shadow. I spent some time viewing and reviewing the pics, even downloading and displaying them full screen on my 32in tv. I was impressed, so much so I ordered one in late December. Nowhere was I told of the bent skeleton being used, or that the ‘natural’ colour had been changed from whatever date. It doesn’t end there, her weight is listed as 27.5 kgs on every web site. Elina was listed as 28 kgs and she is, Leonora is listed as being 29 kgs, I believe she is. Although I have not taken the 156D out of her box, I did stand it up and placing my arms around her waist I lifted. I assume she hasn’t been secured into her box, she was heavy, very heavy (for me) I estimate her weight to be 37.5 kgs. way above my 30kg limit.

You can see her here Please note this is the European site as the co.uk site is no longer available to us. Pay attention to the photo where she stands (the one with her feet in), look at the sculpt of her breasts (shape and nipple position) and the shape of her back, this indicates a ‘straight’ skeleton. Scroll down the page to the very bottom where you will find other galleries with the same body.


Rosina (OR 26 Rose head) and WM 185 Elina (new) Pink colour.
Rosina spends her time with eye protection (from Elina) in a head bag, in a padded box in a cupboard. After every outing she gets washed and pampered, returning to her box clean. And yes I know her upper and lower eyelashes need replacing!

Regards

S.
Julia
Doll Partner
Joined: Feb 2025
Lives with
Joe Bin
Joe Bin
#2 17 Mar 2025 at 1:05 AM 34 views
How vary disappointing for you.
I don't Understand though what the bent skeleton actually is ?
Treat your human right, that's who you depend on the most.
Esjayell
Starter Member
Thread Starter
Joined: Feb 2024
#3 17 Mar 2025 at 1:43 AM 34 views
Dolls have a tubular metal skeleton comprising a neck joint, shoulder joint, spine with a universal hip joint (allows a doll to bend forward and back and go to the sides or a combination of each) it then splays out and terminates at the hip joints. These skeletons were placed into the moulds flat, that is the neck, shoulders, spine, hips and legs were straight, or in line. 'Bent' skeletons have the pelvis moved forward at the hips and returns via the spine joint where it ges up to the shoulders (refer to the first pic.). I can feel Elina's spine from her neck, down her back to just after waist level where it splays out to form her hip joints.

Leonora, a Firedoll, just over two years old, has the bent skeleton. I can feel her spine on her back to just below the shoulders, where it ends, I can feel it from this point from the front, about an inch of tpe is all I need to compress to feel it. Getting her to balance is a challange as I do not know what angles her skeleton should be in to facilitate this. Sitting, laying and general moving about changes these angles constantly.

To get Elina straight again, particularly after one of her keep fit workouts, needs her to lay on the floor while I press on her spine joint, once it is in line, both top to bottom and side to side, she's fine.

Check out YouTube for Sexdoll manufacture.

S.
Jedzed
Harper’s Happy Husband
Joined: May 2024
#4 17 Mar 2025 at 6:15 AM 34 views
Both disappointing and frustrating. Convinces me not to buy WM again.
I hope you are able to get a body for Rosina, even if it isn’t a WM
TheStoryTeller
admin
Joined: Jul 2022
#5 17 Mar 2025 at 8:26 AM 34 views
I won't be getting WM again either because of the copper in the finger joints problem. Both my WMs have rot in their hands because of the copper!
The Story Teller
Seth
Doll Owner
Joined: Jan 2025
#6 17 Mar 2025 at 1:50 PM 34 views
Disappointed for you. I hope you get suitable recourse from the vendor.
Esjayell
Starter Member
Thread Starter
Joined: Feb 2024
#7 18 Mar 2025 at 3:24 PM 34 views
Things just don’t add up. According to UPS the gross weight of the package was 47kgs. It is generally accepted that a doll head weighs about 2kgs, as I ordered 2 that makes 4kgs, lets be pessimistic and call that 5kgs just to be on the safe side. With the 2 wigs, bag of goodies from WM and the penis adapter (ordered as a source of body matched tpe for repairs) lets say that’s 1kg. That’s 6kgs from 47 equals 41kgs. The doll weight is advertised as being 27.5kgs, lets call that 28kgs. 28 from 41 equals 13kgs. I cannot see a cardboard box, two lightweight cotton blankets, a few pieces of polystyrene and four pieces of 3mm ply coming anywhere close to 13kgs (that’s almost six heads). OR/JinSan have grossly misrepresented the true weight of this doll which I consider to be over 30kgs, maybe as high as 37.5kgs.

I will keep you updated as things develop.

Regards

S.
👁 Reply Preview
Loading preview…

Please log in to join the conversation

Log In

Manage Thread Tags

×

Current Tags:

Add Tags:

Reactions

×